Supported Devices
We currently support three of the most widely used inverter brands and one home automation brand. Victron inverters can be easily connected using their existing cloud solution. For Solax and GoodWe inverters, our Delta Link device is required for integration, enabling both data reading and inverter control. With the Infigy home automation system, it’s possible to communicate with any connected inverter regardless of its brand. This communication does not require Delta Link but is currently limited to data reading and does not support control functions.
We are continuously working on supporting additional devices, including electric vehicles and home automation systems.
Technical Requirements
GoodWe Inverters
The inverter must be of type ET and connected to a 2.4GHz Wi-Fi network.
The dongle used for connecting the inverter to the internet must be the Wi-Fi/LAN Kit or Wi-Fi Kit version, not the Wi-Fi Box version.
GoodWe inverters can only communicate with one device at a time. To use Delta Link, other devices connected to the inverter, such as home automation systems, must be disconnected.
Solax Inverters
The inverter must be of type Hybrid G4, Hybrid G5, or Ultra and connected to a 2.4GHz Wi-Fi network.
The dongle for internet connectivity must be at least version WiFi 3.0 or WiFi+LAN 3.0.
Solax inverters can communicate with a maximum of two devices simultaneously. Apart from Delta Link, only one additional device can be connected, which must be set to read-only mode.
Victron Inverters
No restrictions.
